ThinkRider Carbon Power Crankset

THINKRIDER PP6 Bike Carbon Fiber Spider Power Meter Crankset DUB 29MM 162.5-172.5mm ANT+ BLE for Road Bike

They look very good and lightweight.

Very cost-effective and easy to install. I haven't used it yet, but I don't think there will be any special issues.

The function as a power meter is quite satisfactory, and the price is also good.
However, the part that adjusts the length of the crank broke easily.
After installing it for about two weeks and making some minor adjustments, it broke as shown in the photo.
Unfortunately

I purchased the thinkrider pp5 to use with my leese carbon crankset, 2x 12-speed drivetrain. Unfortunately, it was not compatible with this setup. After installation, the power meter moved the chainrings approximately 5 mm too far inward, resulting in an incorrect chainline. Because of this, the front derailleur could not be adjusted properly, causing poor shifting performance.

The power meter may work with other cranksets, but buyers with a leese carbon crank and a 2x 12-speed drivetrain should be aware of this compatibility issue before purchasing.

The manual was almost useless.
First, you need to attach the PP5 to the crank.
There was no indication whether the Octalink washer would be used as well. I installed the washer and assembled it.
The crank shaft is pressed in by tightening the bolt. When removing it, you can unscrew the bolt by turning it counterclockwise. (In that case, do not remove the anti-loosening device outside the bolt.)
The BB on this side is a press-fit (SHIMANO), and when I put in a 1.5mm washer (1.0 and 0.5mm), the chain line was almost aligned.
The other side has a side clearance adjustment mechanism, but even with a 1.5mm washer inserted, it was just barely enough.
The chainring will fall off at the outer low point when used for 11-speed systems due to reverse rotation.
If you install the original SHIMANO 12-speed chainring, it will almost never come off.
I had to install it by trial and error because there was no instruction manual. There were no issues during the 50km test run.

Okay~

Excellent product, I had to add a spacer because the crank arm does not fit enough into the axle and there is a gap between the crank arm and the frame, but it's worth the purchase as it does not affect its functionality.

Charging does not exceed 80%. I'm inquiring with the seller about a defective battery, but they keep giving irrelevant answers.

There seems to be no other solution besides a return... Further seller response will be discussed in the next feedback.

The shipping took a little longer than expected, and then a small amount had to be paid at customs, but the seller...
I will pay that amount; the product is very good and has a very nice presentation; it has a proper weight with all the components.

Everything was great, highly recommended.

The weight is as per the catalog specifications, with a reduction of about 80g compared to the Artegra R8000.

Good cranks, I had to pay a €14 customs surcharge. The potentiometer works well with the Tinkrider app. It took 22 days, a bit slow. I had some Zrace ones that were almost the same, and these are slightly lighter, only 36 grams more with the potentiometer.

I'm excited to test this product. my first ever power meter and for the price it cant be beat! i do hope it can handle power greater than 800w without residual torque values.

I haven't used the product yet, but it looks good. There were unexpected expenses due to customs duties and taxes added during domestic customs clearance. Other than that, I'm satisfied.

I am satisfied with the product; its finish, lightness, and rigidity are excellent.
The data from the meter is accurate, even for sudden wattage changes (every 3 seconds). Assembly was a bit trial-and-error, but okay. The left and right balance measurement is slightly inconsistent, by about 2%.
I can give a 5-star rating based on the price.
Too bad about the expensive shipping and
Conversation with the seller was a bit difficult to make myself understood.

I was able to install it. I'll try using it from now on.

The 24mm shaft has a UD matte finish. Please be careful when purchasing as it is not a carbon pattern. I'm not sure if the residual torque issue has been improved, but for Enjoy fans, there's nothing to complain about.

Very satisfied with the product and the service provided by the seller and AliExpress.

THINKRIDER PP6 Bike Carbon Fiber Spider Power Meter Crankset DUB 29MM 162.5-172.5mm ANT+ BLE for Road Bike

Excellent product!!!! Well packaged and looks of very good quality, worked perfectly and connected very quickly, very lightweight and reads the data super well.