Flexible 12v Solar Panel For Rooftop Install
Get reliable rooftop power with our flexible 100w solar panel. Lightweight monocrystalline design mounts drill-free. Perfect for RVs, boats, and camping.
Key Features
-
Monocrystalline Cells Deliver steady voltage even under partial shade or mild heat.
-
IP67 Junction Box Shuts out dust and rain so your wiring stays safe outdoors.
-
MC4 Connectors Snap directly into standard controllers without soldering or extra tools.
-
Stainless Eyelets Offer quick rope or bungee securing when adhesives aren't preferred.
-
Slim PET Lamination Keeps thickness at just 2.5mm for low-profile roof mounting.
Product Description
This flexible photovoltaic board turns sunlight into clean electricity with zero hassle. Grade A monocrystalline silicon cells feed energy through the protected junction box and straight to your charge controller. You get consistent wattage output without heavy glass frames or difficult installations. The panel bends slightly to match curved vehicle roofs or deck rails while staying durable enough for daily travel.
Product Overview
You are getting a plug-and-play power source built for mobile and stationary setups alike. It comes factory-sealed with a 0.9-meter lead wire and industry-standard terminals ready for immediate deployment.
Key Benefits
-
Fewer Roof Holes Preserves your vehicle warranty and prevents water leaks.
-
Lighter Load Weighs only 1.7kg so it won’t strain vintage van or camper chassis.
-
Faster Charging Captures morning light earlier thanks to its wide 166mm cell layout.
-
Easy Storage Slides behind seats or under tables when you need ground space back.
Features
-
Certified Safety Meets CE, RoHS, and WEEE standards for responsible electronics.
-
Secure Mounting Works with strong outdoor adhesive tape or tensioned straps.
-
Temperature Stable Operates smoothly from -20°C up to +65°C without efficiency loss.
-
Series Wiring Ready Links cleanly with other boards for higher voltage arrays.
Specifications
-
Max Power Output 100W at 18.18V and 5.5A
-
Open Circuit Voltage 21.8V
-
Short Circuit Current 5.83A
-
Cell Configuration 33 series | 166x166mm cells
-
Physical Size 970 x 530 x 2.5 mm
-
System Weight 1.7 kg (+/- 0.1kg)
-
Cable Specifications 0.9 meter | 2x2.5mm²
-
Operating Temperature -20°C to +65°C
What’s Included
Your order arrives with one flexible solar board, pre-attached MC4 leads, and stainless eyelet hardware. Controllers, extension cables, and mounting tape ship separately if not selected in your cart.
How to Use
Connect your battery to the charge controller first until the unit recognizes a 12V or 24V system. Plug the photovoltaic positive and negative wires directly into the matching regulator inputs. Route the final plus and minus lines to your load or power station. Keep battery cables short to reduce voltage drop during operation.
Customer Benefits
You gain quiet, emission-free energy for gear charging without hunting for fuel or dealing with generator noise. The straightforward wiring means beginners can install it safely in under an afternoon. One-year replacement coverage protects your investment against delamination or factory shipping damage.
Ideal Uses
-
Off-Road Camping Powers lanterns, routers, and small fridges from dawn patrols.
-
RV & Boat Living Replaces dead batteries overnight while anchored or parked.
-
Shed & Cabin Backup Trickle-charges maintenance-free batteries during winter months.
-
Emergency Prep Provides instant grid independence during unexpected outages.
Who It’s For
This setup matches weekend explorers, remote workers, and budget-conscious builders who want dependable daytime power without heavy glass frames or complex engineering. It works best with lead-acid storage including AGM, Gel, or flooded types.
5 Frequently Asked Questions
-
Q: What is the difference between the kit and the panel-only option? A: The panel-only package contains just the 100W board and wires. Choose the kit version if you need a matched charge controller and MC4 connection cables added to your cart.
-
Q: Does this work with lithium batteries? A: The regulators listed here are designed specifically for lead acid banks. Lithium and NiMH systems require different voltage thresholds.
-
Q: Why will my output never hit exactly 100 watts? A: Lab ratings assume perfect 25°C cells and direct overhead sunlight. Real-world clouds, angles, and summer heat naturally drop performance by 10 to 20 percent.
-
Q: How fast does local warehouse shipping arrive? A: Orders dispatch from US, EU, or Russia hubs to reach most customers in two to seven business days with no import duties attached.
-
Q: What happens if my panel arrives damaged? A: Send us a photo within your first year. We will mail a brand-new replacement immediately without requiring return shipping or restocking fees.
