SPECIFICATIONS
Battery: 5000 mAh lithium-polymer battery
Battery Charging Input: 5 V/1.5 A
Better than: KM100 KM100X KM100E IM508
Brand Name: Autel
Dimensions: 237.8 mm x 148.6 mm x 35.5 mm
Display: 7-inch LCD capacitive touchscreen with 1024 x 600 resolution
High-concerned chemical: none
Memory: 64 GB
Operating System: AndroidTM 11
Origin: Mainland China
Processor: Cortex-A55 processor (1.8 GHz)
Software Update: 2 Years Free Update
Supported Automotive Protocols: ISO9141-2, ISO14230-2,ISO15765, K/LLine, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898(Highspeed, Middlespeed, Lowspeed and Singlewire CAN,fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6
Technical Support: Litetime
Autel Scanner MaxiIM IM508S,upgraded of IM508 KM100, Diagnostic Scan Tool & IMMO key Programmer Tool, Smart & Expert Mode, 3000+ Bidirectional Tests, 40+ Resets, OS11, 4-Core, 4/64G, AutoAuth
NASTF SDRM Compliance for North America:
Autel is integrating the NASTF Secure Data Release Model (SDRM) validation protocol into supported key and immobilizer programming tools used in North America.
Applicable Products: Autel MaxiIM KM100, IM508 Series and IM608 Series.
Applicable Region: This requirement applies when the device is used under a North American IP address.
Implementation Schedule: KM100 is scheduled to enable SDRM validation beginning September 1, 2026. IM508 and IM608 Series devices will be updated in subsequent phases.
User Registration Required: Eligible key and immobilizer programming functions may require the end user to maintain an active NASTF SDRM account.
Important Notice:
NASTF SDRM registration is not included with the purchase of this Autel device. The end user must apply, pay and renew the SDRM qualification directly through NASTF. All eligibility requirements, fees and approval decisions are independently managed by NASTF and are not controlled by Autel or the seller.
1.Do I need a NASTF SDRM account?
For certain security-related key and immobilizer programming functions in North America, an approved and active NASTF SDRM account may be required.
2.Is the SDRM account included with the device?
No. The SDRM account must be registered and maintained separately by the end user through the official NASTF platform.
Autel MaxiIM IM508S, Upgraded Ver. of Autel IM508/ KM100:
Newest Autel IM508S is an ultra-fast portable programming scan tool, significantly upgraded from IM508 and MaxiIM KM100. It combines powerful programming, comprehensive OE diagnostics, and hot services, making it a rising star in Autel's flagship lineup. It outshines the old models IM508 KM100E MK808S MX808S in every aspect. Equipped with Smart Mode & Expert Mode and XP200 Programmer, it supports various functions such as: Reading PIN, Learning,rem.ote learning, ECU reset,adaptation Ref.resh/coding,etc. The IM508S is designed to deliver superior performance and versatility, making it an indispensable tool for automotive professionals.
21+ Languages Support & 2 Years Free Update:
■ 1 Year Warranty and 2 Years Free Update.
■ Support Languages: English, Traditional Chinese, Spanish, French, German, Russian, Japanese, Korean, Polish, Portuguese, Swedish, Persian, Turkish, Thai, Vietnamese, Hebrew, Arabic, Indonesian English, Italian, Dutch.
( Please send us the S/N of device to activate the language you need and 2 years free update. Thanks~)
BIG Attention: IMMO functions upgraded!
Password-Free Reading via Bench/Boot mode for the two most demanding vehicle categories in the market.
✅Nissan — Latest RH850 MCU Types
✅Ford — 2021+ New Immobilizer Systems
Strongly recommend sending VIN to us check compatibility.
ECU/ETU Cloning For Mercedes Benz (New Feature), for BMW, and For Volkswagen.
✅For Mercedes Benz (New Feature)
1.The following ECU cloning function covers models from 2000 to 2019.
2.Supports cloning (Bench mode) for the following 27 ECMs from 4 suppliers for Mercedes.
3.Supports cloning for the following 8 TCUs for Mercedes.
✅For BMW
1.The following ECU cloning function covers E/F/G chassis-equipped models up to 2019.
2.Supports cloning (Bench mode) for the following 42 ECMs from 2 suppliers for Bmw.
3.Supports cloning (Bench mode) for the following 6 TCUs from 2 suppliers for Bmw.
✅Volkswagen
1.The following ECU cloning function covers models from 2000 to 2024
2.Supports cloning (Bench mode) for the following 62 ECMs from 3 suppliers for VAG.
3.Supports cloning (Bench mode) for the following 6 TCUs from 3 suppliers for Volkswagen.
VIN/O..meter Check:
● Adds "VIN/O..meter Check" feature, which supports reading the mileage and Vehicle Identification Number (VIN)values stored in various control units of the vehicle.
● By comparing the values,it serves as reference information for the maintenance history of the vehicle module.
● Supported Manufacturers: Chrysler, Dodge, JEEP, Porsche, Hyundai, Kia, Genesis, Fiat, Alfa, Abarth, Lancia, VW, Audi, Bentley, Lamborghini, Seat, Skoda, Nissan, Infiniti, NissanGTR, Toyota, Scion, Lexus, Subaru, Suzuki, Ford, Mazda, Peugeot, Citroen, DS, LandRover, Jaguar, GM, Chevrolet, BMW, Mini, Renault, Dacia, Samsung, Volvo, Polestar, Benz, Maybach...
Autel IM508S Auto Key Programmer Highlights:
【Comprehensive IMMO & Key Fob Programming】Autel IM508S key programming tool is able to perform programming for key & chips (MCU/EEPROM) andI MMO related functions including IMMO ECU Reset/Adaptation, IMMO ECU Refresh/Coding, PIN/CS Reading, Key Generation, Key Learning, Remote Learning, etc.
【With XP200 & Smart Mode/ Expert Mode】Smart Mode: To a function menu where each function is configured, and provides guided fuctions with step-by-step instructions. Expert Mode: To a function menu where each function is seperated from each other, and provides skilled technicians a convenient way to perform individual functions they need.
【40+ Maintenance Services】Autel IM508S support 40+ special service functions, covering many of common maintenance needs, such as Oil, EPB, BMS, D-P-F, SAS, ABS brake bleed, and etc.
【Bi-Directional Control/ Active Test】Which can perform active test that can send commands to the ECU to activate the actuators, like ABS, window, door, solenoids, valves, wipers, headlamp, etc, for directly monitoring their operation to quickly find out bad parts and pinpoint faulty issues.
【OE-level All Systems Diagnostic, Same as MK808BT PRO】Autel IM508s has the same diagnostics functions as Autel MK808BT PRO / MK808S, which can quickly diagnose all available modules for more than 80 US, EU and Asian cars.
【Work with XP400Pro Key Programmer】When connected to XP400 Pro, IM508 can extend its capability to support IMMO functions such as BMW CAS4 Key Learning, and Programming functions such as IMMO ECU Read & Write, MC9S12 Encryption Chip Read & Write, IC Card Read & Write, Mercedes Infrared Key Read & Write, Remote Frequency Detect, etc.
【More】Cloud Management, FCA Auto Auth, AUTO VIN SCAN, Shop and Data Manager Applications...
Comprehensive IMMO Functions:
The IMMO application requires a data link to the IMMO electronic control system of the test vehicle for diagnosis via OBD II connection.
This application can access the key chip, read, retrieve and write key information, support read PIN/CS (all key lost), key generation, key learning, remote learning, IMMO ECU Reset/Adaptation, IMMO ECU Refresh/Coding, Backup/Restore IMMO Data, BMW FEM/BDC Key Learning and ECU Adaptation.
Advanced Key Programming:
The Programming application requires connection between the tablet and the XP200, and no vehicle connection is required. This application can access the key chip, read, retrieve and write key information, as well as other key related functions.
● Read PIN/CS (AII key Lost)
● Key Generation
● Key Learning/Remote Learning
● Backup/Restore IMMO Data
● IMMO ECU Reset/Adaptation,Refresh/Coding
● For BMW FEM/BDC Key Learning and ECU Adaptation
● For VW/For AUDI MQB Key Learning,48 Transponder(96-bit)Add Key ,All Key Lost,A6 AII Key Lost
Enhance Functions With Extra XP400 Pro(XP400PRO Purchased separately):
Autel MaxiIM IM508S work with XP400 Pro and various Adapters, can not only make advanced function for Benz 3rd, BMW CAS 4/ 3/2, VW/ Audi MQB, but also read/ write ECU, MC-9_S12, Detect Frequency etc. Besides, It supports for 2015-2019 Jaguar Land Rover, Volvo, late Model Hyundai Kia.
Exclusive Smart Mode & Expert Mode:
Autel IM508S car scan tool provides Smart Mode & Expert Mode to guide technicians to perform related functions. For primary technician, Smart Mode provides guided functions with step-by-step instructions. For skilled technicians, Expert Mode provides them with convenient way to perform individual high-end functions they need.
40+ Hot Services for All-Around Solution:
Want one scan tool to handle all daily repairs? This Autel scanner boasts the same range of common special functions as IM608 PRO II yet is more cost-effective. The services work for Oil reset; EPB; TPMS; BMS; Brake bleed; Aftertreatment; Immo keys; Injector; SAS; Suspension; Throttle; VIN DR ROOF; Seets; Odometer; Lang change; Headlamp; CHG tire size; TEC learn; ABSSRS; Cylinder; VGT learn; Speed & PTO; Clutch; Trans adaptation; Airbag reset; A/F Setting; Automatic Start/Stop; Electronic Water Pump start; EGR; VIN; FRM RESET; Transport; Mode; HV Battery; ACC; A/C; Rain/Light Sensor; Reset control unit and more.
There Are More Special Functions Inside:
All these Hot Services are packed into the “Service Function” module, making it a breeze to handle your car’s service and maintenance. Just enter in the software for your specific car model, and you’ll explore a world of services.
[For Example] For 2006 Chevy Silverado, accessing its TCM service functions is as easy as navigating through: “Chevy Software” -- “System Selection” -- “Transmission Control Module (TCM)” -- “Special Functions”.
3000+ Active Tests & Bidirectional Control:
Autel IM508S is also a bidirectional scan tool, can send commands to activate mechanical & electronic components, and receive a response to test sensors, valves, and solenoids. This bi-directional way can help you quickly locate faulty auto parts without breaking the car. Tests cover: Radiator Fan, Lights, Doors, Windows, Mirrors, Cycle A/C, Sound Horn and more. Tests menu = IM608S II / IM608 PRO II, but only half the price!
OE-Level All Systems Diagnostic:
IM508S scanner scans vehicles all available modules and perform OE-level diagnosis: reads/clears codes, displays ECU info, views sensors live data (text, wave graph, histogram, or meter diagram, etc.), freeze frame data, performs active tests and specific services for full systems. It supports QR-code quick reports sharing.
● ECU Information — provides the retrieved ECU information in detail. An information screen opens upon selection.
● Read Codes — displays detailed information of DTC records retrieved from the test vehicle’s ECU.
● Erase Codes — erases DTC records and other data from the test vehicle's ECU.
● Live Data — retrieves and displays live data and parameters from the test vehicle' s ECU.
● Active Test — accesses specific subsystem and components tests of vehicles.
● Special Function — performs various component adaptations.
AutoVIN & Scan:
How much time have you spent on car maintenance? Even minor issues can consume lot of time. The IM508S obdii scanner code reader is designed to enhance your work efficiency. With its AutoVIN technology, you can quickly identify your vehicle's make, model, and year with just one click.The convenient AutoScan automatically scans all of the vehicle's ECUs and detects any fault codes. 🚦📢👉Tips: AutoVIN depends on whether the VIN is programmed in ECU or not. Usually for 2006+ cars, the old cars usually not available.
Remote Desk:
Stumped by a weird car issue? No worries! The Remote Expert (Remote Desk) can help you get connected with instant pro advice right on the spot. It’s like having a car expert remotely, cutting down on guesswork and efforts. Plus, it saves you from extra training or Googling when you’re stumped. Just jump online and get wisdom from car experts around the globe, no matter where you are.
Inspection Work:
You can pair IM508S with endoscope MV105S / 108S to inspect issues inside: engine combustion chamber, exh***t system, fuel injectors, cooling system, turbocharger, cylinder walls, braking system, and transmission, etc. This helps examine areas that are not visible to the naked eye. By capturing still images and recording videos, this inspection can be very useful for diagnosing hidden issues.
Autel Colud Report:
All test reports can be stored in Autel Cloud Server, ready to view, and easy to share. It’s like having a file management system of your business, making it super simple to keep everything under control. You can check out all reports for one client or scroll through them all by date. No more hunting for lost papers or sorting through stacks of files – it’s all there, neat and tidy, saving time and stress.
FCA Auto Auth:
Autel IM508S PRO can diagnose FCA cars in/ after 2018, Compatible with 2018-2025 Fiat, Chrysler, Alfa Romeo, Dodge, Jeep, Compatible with 2015+Renault RGW-equipped vehicles (including for Kadjar, Megane lV, Scenic IV, Talisman, Espace V, Koleos ll.Captur ll ) .
How To access SGW? 3 steps as follows: Account-Activation-Access!
1. Authorized OEM Access Account Registration;
2. Confirm Compatible Diagnostic Platform;
3. Immediate Authorized Se-cure Gat-eway Access. Please be noted, FCA Auto Auth feature is limited on Diagnose, if you need perform special function on FCA cars, please purchase 12+8 adapter to connect cars.
15,000+ Coverage, FCA Autoauth:
Autel MaxiIM IM508S auto scan tool can work on 80+ makes, 15,000+ models worldwide from 1996 to today, covering the latest cars with protocols of DoIP & CAN-FD. Autel IM508S also supports FCA Autoauth & Renault SGW log-in, which means you can work on FCA vehicles after 2018 (Chrysler/ Dodge/ Jeep) directly to perform diagnostics and services. Functions are NOT universal, please check compatibility before order.
Autel MaxiIM IM508S Package Includes:
1* Main Unit
1* XP200
1* Main Cable
1* USB Type-Cable
1* Mini USB Cable
1* Power Adapter
1* APB001 (EEPROM Adapter)
1* APB002
1* APA002
1* APA001
1* Quick Reference Guide
1* Packing List
1* Soft Cloth
1* Carrying Case 504x360x133mm
