It arrived promptly and exactly as agreed.

I will still test it.

good product

Everything is as described. The entire set is included. Additional heaters and tips were included in the set price of 75 PLN.

I made a label with photo 1 for people so they can quickly check their setup and make a controller for this tweezers or adapt it for their station. Overall, so far everything is fine, it's soldering without problems, but you need a bit of practice with it. The heating elements seem to be cemented in place, which is a bit concerning (photo 2). I also want to note that the pins are not fixed; photo 3 shows a whole element, so there will probably be a problem with replacement. The resistance of each element is 15 ohms; the rest are in the label (please note that the manufacturer may change the color of the wire or pins, so test it yourself with a multimeter to see if yours is the same as mine on the label before connecting). I'll work on it a bit and try to add more information.

Excellent quality soldering iron, you can buy it

The soldering iron is very good, heats up quickly, and maintains the temperature well.

The materials are very good, excellent for desoldering SMD components.

I haven't tested it yet; I'll have to study to adapt my Yaxun 878D++ soldering station.

Arrived quickly and undamaged, very well packaged. Nice soldering tweezers, but needed slight alignment. 7 pin plug is high quality and easy to remove and reuse. Replaced with 5 pin plug for yihua 862d+ soldering station, but have to also replace heating elements with a1321 for sensor compatibility (k-type thermalcouple works but incompatible with 862d+ / 907f)
Recommend heating elements in series if converting for another station, still heats well.

The product was delivered without any issues.
The product was delivered accurately.
There is no problem with the product.
The seller is trustworthy.
I will repurchase again.

The product was delivered without any issues.
The product was delivered accurately.
There is no problem with the product.
Packaging carefully to prevent product damage
The seller is trustworthy.
The quality of the product is also very good.
Thanks to the trustworthy seller, I want to purchase again.

The order arrived quickly in a general package, the soldering iron matches the description, satisfied with the purchase.

Nice, unfortunately it didn't fit me. I have for 5 pins and here 7 are required.

Works with Yihua 937D pin1 blue pin2 orange yellow pin3 green pin4 black pin5 white red.

Excellent product. Excellent seller. I recommend.

It seems like I failed to pull it out haha. I also have the Godeak 863, but to use it, I need to purchase a separate 6-hole aviation connector and solder it.

very well packaged, didn't even expect it.

After replacing the plug, I connected it to the OSS T12-X PLUS soldering station.



After replacing the plug, I connected it to the OSS T12-X PLUS soldering station.

Works well. My soldering station is not compatible with this soldering iron, so I changed the connector to USB A and connected the soldering iron directly to the power supply. At a current of 1.6 A and a voltage slightly below 12 V, the temperature is about 290 - 300°C. On the standard connector, pin 7 is common. 1 and 2 are heater outputs. 3 is grounding. Black is common for thermocouples, red and white are positive outputs of thermocouples. At 300°C, the voltage on them is about 17 mV. You can make a thermostat.