Active Wooden Subwoofer

Experience deep, room-filling sound with this active 12 inch wooden subwoofer. Built for home theaters and studio setups, it delivers crisp bass across 26Hz to 200Hz. The robust wooden cabinet minimizes resonance while the integrated AB class amp drives up to 650W peak power. Connect simply via audio line input and enjoy high-power extra bass mode . for movie nights, music production, or live stage monitoring. Trust certified performance designed for lasting reliability and effortless setup.

• Active 12 Inch Subwoofer
• HiFi Wooden Bass Speaker
• Home Theater Extra Bass
• 350W Powerful Subwoofer
• Stage Low Frequency Driver

1.Active Wooden Subwoofer

PIVASY Active 12‑Inch Wooden Subwoofer | 350W HiFi Home Theater Speaker

2. Key Features

• Larger 12‑inch driver Moves more air for deeper impact than standard bookshelf units.
• AB class amplifier Delivers clean, controlled power without distortion at high volumes.
• Fiberglass horn disc Resists flexing under heavy load to keep your notes tight.
• Full‑range crossover Blends smoothly with existing speakers so transitions stay seamless.
• Extra bass mode Pushes low frequencies hard when you want maximum physical punch.

3. Product Discription

You will notice the difference the moment you press play. This dedicated low frequency engine fills dead rooms without muddying your mid ranges. The enclosure sits solidly on your floor because the wood shell absorbs internal vibrations. You get reliable output whether you stream movies late at night or tune guitars in a rehearsal space.

4. Product Overview

This is a self-contained active subwoofer built around a single 12‑inch transducer. It targets listeners and technicians who need predictable bass extension up to 200Hz. You receive a complete audio component ready to anchor your sound system.

5. Key Benefits

You gain accurate low end that supports vocals instead of competing with them. Your viewing sessions feel immersive because explosions and score lines land with real weight. You stop worrying about blown capacitors because the rated 350W rating sits comfortably below the 650W maximum ceiling.

6. Features

The unit houses a high rigidity fiberglass horn attached to a sturdy wooden cabinet. Internal wiring routes straight into the built-in transformer. You control output through your source device or receiver while the hardware handles distribution.

7. Specifications

• Frequency response 26Hz to 200Hz
• Low pass filter Adjustable from 26Hz to 150Hz
• Rated continuous power 350W
• Maximum peak power 650W
• Impedance 4 Ω
• Sensitivity 95dB referenced at 2.83V/M
• Enclosure dimensions 375 × 395 × 435 mm
• Unit weight 24.8 kg
• Horn weight 6.65 kg
• Voltage compatibility 100V–240V AC
• Connection type Audio line input
• Certification CE approved

8. What’s Included

You open the box to find one active subwoofer and a power adaptor ready for immediate installation.

9. What’s Included

The packaging protects the dense wooden chassis and arrives with all necessary cables to reach your receiver or mixer.

10. How to Use

Place the subwoofer near your main left and right speakers on a level surface. Plug the included adaptor into a standard AC outlet rated between 100V and 240V. Run an RCA or stereo line cable from your processor to the subwoofer input. Power the unit on and raise the source volume until you hear smooth reinforcement. Dial the crossover knob toward 80Hz for surround mixes, or push it toward 150Hz for solo playback.

11. Customer Benefits

You save time tuning EQ curves because the factory crossover bridges the gap to your existing drivers. You protect your hearing by offloading low frequency duty away from smaller satellite speakers. You walk into your living space or studio knowing the bottom shelf will never crackle again.

12. Ideal Uses

Homes theater enthusiasts pair it with projectors and AV receivers. Live performers route band stems to monitor front-of-house systems. Recording artists track hip hop and electronic genres where subharmonic precision matters. Gamers mount it under desks to feel directional cues without wall bouncing.

13. Who It’s For

This model serves audiophiles chasing reference accuracy, mobile DJs needing rapid deployment, and content creators who demand broadcast grade low end.

14. 5 Frequently Asked Questions

Do I need a separate amplifier for this unit?
No. The 350W rated AB class amplifier lives inside the cabinet, so you only plug in standard AC power and attach your audio source.

Can I run this subwoofer on battery power during blackouts?
No. This model uses wired AC electricity only and requires a live 100V to 240V wall connection to operate.

What cables connect to the input port?
The unit accepts standard stereo line signals compatible with most receivers, mixers, and TV outputs.

Does the wooden shell come with grilles or feet?
The raw wooden enclosure ships flat and bare. You may add standard rubber pads to improve floor grip if desired.

Is the crossover manual or automatic?
The low pass section adjusts manually between 26Hz and 150Hz, giving you exact control over where bass blends.

• Biblical Mysteries video channel Active Wooden Subwoofer
• Smart Electronics and Connected Devices
• Smart Electronics and Everyday Accessories
• Featured Gadgets and Everyday Essentials

Product identification: Active 12 Inch Wooden Subwoofer

OurLum specializes in Smart Electronic products, connected devices and useful everyday accessories.