Dream Color RGB LED Stair Light Controller With Motion Sensor For PixelTape Glow

Dream Color RGB LED Stair Light Controller With Motion Sensor For PixelTape Glow

Elevate stair safety and ambiance with the Dream Color RGB LED Stair Light Controller. Built for PixelTape Glow systems, this high‑reliability controller supports popular IC LED strips (WS2811, WS2818, SM16703, TM190) and pairs with a low‑voltage power setup to deliver vibrant color, seamless transitions, and motion‑activated illumination. The included PIR sensors and adjustable settings give you direct control over brightness, timing, speed, color, and pixel quantity, so you can tailor the effect to any stairway or entryway.

Key compatibility and specs

• Input voltage: 12V–24V DC (does not run on 220V directly; use a suitable transformer).
• IC strip support: WS2811, WS2818, SM16703, TM190 IC LED strips.
• Pixel options: Pixel single color (up to 360 LEDs/m) or Pixel RGB (up to 720 LEDs/m) depending on your strip.
• Package includes: 1x Pixel Controller, 2x PIR sensors (1 meter each), plus basic installation tools.
• Not waterproof; designed for indoor use on stairways and steps.

Why this Dream Color controller stands out

• Simple long‑press and short‑press programming lets you set Brightness, Time Delay, Speed, and Pixel Qty with an on‑screen digital readout.
• Daylight sensor option (Lux) lets you control when the light activates, balancing energy use with safety.
• Separate channels for RGB and single‑color pixels ensure precise color control and smooth color fades.
• Intuitive mode selection and per‑segment color control enable dynamic chase patterns and bespoke stair effects.
• Rugged design with 1,000,000 hours average life ensures reliable performance across years of daily use.
• Low‑voltage wiring enhances safety on stair installations, reducing electrical risk and improving installation flexibility.
• Includes two PIR sensors for reliable motion detection at both entry and exit positions on stairs.

How to use and install

• Connect your 12V–24V DC transformer to the controller, then attach the LED strip to the pixel outputs. Do not exceed the specified pixel qty for your strip.
• Use the Setting control to adjust Brightness (HH01–HH99), Time Delay (LL01–LL99), and Speed (EE01–EE99). Save with a long press after configuration.
• Choose the correct channel (CH‑1 for Single Color, CH‑3 for RGBIC) based on your strip type, then pick the color range or static color as desired.
• Enable Daylight Lux mode to tailor activation to ambient light levels, minimizing energy usage during daylight hours.
• Position the PIR sensors at the entrance and exit of the stairs, facing the path to ensure consistent detection.

Where to buy and explore more

Discover complementary products and ideas for your PixelTape Glow installations at OurLum. For more options and related solutions, visit the OurLum homepage.

Explore similar ideas and fast‑finding resources:

• RGB LED control and effects: RGB LED
• Motion Sensor lighting solutions: Motion Sensor

7 Benefits

• Safe, low‑voltage operation makes stair lighting installations easier and safer.
• Motion‑activated lighting improves stair safety and reduces energy waste.
• Precise color and brightness control unlocks immersive stairway ambiance with PixelTape Glow.
• Long‑life design (up to 1,000,000 hours) minimizes maintenance and replacement costs.
• Flexible compatibility with multiple IC LED strips broadens your upgrade options.
• Clear digital feedback (HH01–HH99, LL01–LL99, EE01–EE99) simplifies setup and fine‑tuning.
• Daylight sensor option helps conserve energy by adapting to ambient light conditions.

5 Features

• RGB and Single Color mode with dedicated CH channels for precise strip control.
• Brightness, Time Delay, and Speed adjustable in 99‑level steps with on‑board readout.
• Pixel Qty setting to match your exact LED count for accurate animations.
• Color selection across a range of hues for vibrant stair lighting scenes.
• Daylight Lux sensor option to tailor activation to ambient light and occupancy.

7 Q&A (with keywords)

1. What LED types does the Dream Color controller support? It supports WS2811, WS2818, SM16703, and TM190 IC LED strips, making it ideal for RGB LED stair installations.
2. Is this product suitable for outdoor use on stairs? No, it is not waterproof and should be used indoors with proper enclosure; plan for safe indoor installation alongside a Motion Sensor enabled setup.
3. Can I run this controller with a 24V power supply? Yes, the unit supports 12V–24V DC input, and you must use a compatible transformer to power the LED strip.
4. How do I adjust brightness and speed for RGB LED effects? Use the Setting control to adjust Brightness (HH01‑HH99) and Speed (EE01‑EE99); you will see real‑time on‑device digits for precise tuning.
5. Do I need to connect to 220V mains? No, this is a low‑voltage controller; do not connect directly to 220V to avoid damaging the device.
6. What about motion activation for safety on stairs? The included PIR sensors enable automatic lighting when motion is detected, perfect for Motion Sensor‑driven stairways.
7. What’s included in the package? The kit includes 1 Pixel Controller, 2 PIR sensors (1 meter each), and essential installation tools to support RGB LED stair lighting projects.

5 Comparative Advantages

• Greater compatibility with multiple IC LED strips compared to standard single‑brand controllers, enabling broader RGB LED deployments.
• In‑built daylight sensor option reduces energy use while preserving safety during daytime stair traversal.
• Dual PIR sensors improve detection reliability at both the entry and exit of stairs for consistent Motion Sensor performance.
• Extensive 99‑level parameter controls for brightness, speed, and delay, offering granular customization beyond typical controllers.
• Long life and robust low‑voltage design minimize maintenance and enhance long‑term stair lighting projects.