Secure Payment
Fast Delivery
Money Back Guarantee
24/7 Support
Quality Assurance
Free shipping on all orders . See details
Estimated between Oct 11, 2026 and Oct 13, 2026 Ships within 1-3 business day after payment clears. | SHOP Track Order | Ourlum Orders | Track Orders
30 days returns. 100% Money back guaranteed. See details
Gordak 902 BGA Soldering Station uses a dual ceramic heater for fast rework. Its long-elbow tweezer tip grips chips directly on crowded boards. Upgrade your repair workflow today.
Ceramic heating coil warms nearly instantly.
Tweezer-style contact head grabs small components easily.
Extended arm reaches tight spaces without snagging nearby parts.
Mixed ABS body and metal frame withstand daily bench pressure.
You need steady heat when tracing faulty lines or replacing microchips. This station delivers controlled warmth through a double-clamp design. The specialized tip works like surgical tweezers so you position patches without sliding. Fifty-three technicians rate it four-point-nine-one out of five. It replaces guesswork with precise thermal transfer.
This unit is a dedicated desktop rework platform. It comes CE certified for standard workshop electrical codes. The compact footprint leaves ample room alongside your microscope. You simply plug the base into wall power and begin.
You cut alignment errors by holding parts stationary while the joint melts.
You spare adjacent connectors from unintended melting thanks to directed heat.
You finish dense boards faster with a tool built specifically for chip retrieval.
Dual Heating Core: Two electric elements warm the clamp uniformly.
Direct Contact Tip: Bare metal tip transfers heat straight to component leads.
Elbow Grip Geometry: Curved handle raises your hand away from hot flux.
Input Voltage: 24 volts
Output Power: 60 watts
Shell Construction: Heat-resistant ABS casing over reinforced steel
Element Type: Fast-response ceramic heater
Main power base unit
Curved tweezer operating handle
Quick-start reference sheet
Connect the cord to a standard outlet.
Allow the display to indicate readiness.
Press the lever until the heated clip secures your target chip.
Release once the solder flows and the board cools completely.
You achieve cleaner joints with fewer cold connections.
Your wrists stay relaxed during extended repair marathons.
You spend less time troubleshooting burnt footprints or misaligned pads.
Smartphone motherboard trace restoration
Laptop RAM slot replacements
Drone flight controller swaps
Home entertainment center board cleaning
Independent repair technicians handling high volume orders.
Hobbyists restoring vintage audio equipment and gaming gear.
Students learning advanced surface-mount techniques.
Does this handle work with other brands? No. The tweezer clip mates only with the Gordak 902 station. Mixing bases causes electrical arcing.
Is the power output adjustable? The unit runs at a fixed sixty-watt output. You get steady heat designed for quick rework cycles.
Does it come pre-assembled? Parts ship ready to plug in for immediate bench setup.
Can I replace the tip? Yes. Replacement tips follow standard sizing for this model.
What warranty covers defects? Standard manufacturer coverage applies to structural faults.
Shop OurLum with confidence—secure payments, fast shipping, easy returns, order tracking, and reliable support.
At OurLum.com, we don’t just promise quality—we guarantee it. Every product is carefully selected and tested to meet real-life needs, and your satisfaction is 100% backed by our no-hassle return policy. If it doesn’t work for you, we’ll make it right—fast. Shop confidently knowing you're getting trusted products, secure checkout, and real support when you need it. Because at OurLum, your peace of mind comes first
It arrived promptly and exactly as agreed.
Well, everything arrived correctly and was very well packaged, but just to inform those who are considering buying, I thought it would be Plug and Play with the Yuyum soldering station, but I was wrong because the terminals are different and I will have to replace them to be able to use it. The ones from the station are 5-way with thick pins, and the ones that came are 7-way with thin pins.
This is the detail you can see in the photos; the rest came well packaged and should be of good quality. Now I need to make some changes to be able to use it.
I will still test it.
The connector is different from most soldering stations I've seen 😅 it comes with a hole for seven thin pins
Small detail
good product
Everything is as described. The entire set is included. Additional heaters and tips were included in the set price of 75 PLN.
I made a label with photo 1 for people so they can quickly check their setup and make a controller for this tweezers or adapt it for their station. Overall, so far everything is fine, it's soldering without problems, but you need a bit of practice with it. The heating elements seem to be cemented in place, which is a bit concerning (photo 2). I also want to note that the pins are not fixed; photo 3 shows a whole element, so there will probably be a problem with replacement. The resistance of each element is 15 ohms; the rest are in the label (please note that the manufacturer may change the color of the wire or pins, so test it yourself with a multimeter to see if yours is the same as mine on the label before connecting). I'll work on it a bit and try to add more information.
Excellent quality soldering iron, you can buy it
The soldering iron is very good, heats up quickly, and maintains the temperature well.
The materials are very good, excellent for desoldering SMD components.
I haven't tested it yet; I'll have to study to adapt my Yaxun 878D++ soldering station.
Arrived quickly and undamaged, very well packaged. Nice soldering tweezers, but needed slight alignment. 7 pin plug is high quality and easy to remove and reuse. Replaced with 5 pin plug for yihua 862d+ soldering station, but have to also replace heating elements with a1321 for sensor compatibility (k-type thermalcouple works but incompatible with 862d+ / 907f)
Recommend heating elements in series if converting for another station, still heats well.
The package will arrive within 2 weeks. The product appears to be intact. I haven't fully checked it yet.
arrived damaged
The product was delivered without any issues.
The product was delivered accurately.
There is no problem with the product.
The seller is trustworthy.
I will repurchase again.
The product was delivered without any issues.
The product was delivered accurately.
There is no problem with the product.
Packaging carefully to prevent product damage
The seller is trustworthy.
The quality of the product is also very good.
Thanks to the trustworthy seller, I want to purchase again.
The order arrived quickly in a general package, the soldering iron matches the description, satisfied with the purchase.
Nice, unfortunately it didn't fit me. I have for 5 pins and here 7 are required.
Works with Yihua 937D pin1 blue pin2 orange yellow pin3 green pin4 black pin5 white red.
