PowMr MPPT Solar Charge Controller

PowMr MPPT Solar Charge Controller

PowMr MPPT Solar Charge Controller 60A 160V Plus Version

Stop losing peak sunlight hours. The PowMr MPPT 60A charge controller captures maximum panel output instantly. Watch your screens fill daily as lithium or deep cycle batteries reach full capacity faster. Shield your investment against voltage spikes, reverse wiring, and overheating. Secure professional grade solar management today.

• PowMr MPPT Solar Charge Controller
• 60A MPPT Solar Regulator
• 160V PV Input Controller
• Lithium Battery Charger
• DSP Solar Energy Manager

1.PowMr MPPT Solar Charge Controller

PowMr MPPT Solar Charge Controller 60A 160V Plus Version

2. Key Features

• Maximum Power Tracking Drives conversion efficiency past ninety-eight percent while maintaining greater than ninety-nine percent MPP capture.
• Automatic Voltage Switch Detects twelve, twenty-four, thirty-six, or forty-eight volt banks instantly without manual dial adjustment.
• DSP Processing Core Runs rapid calibration loops for precise three-stage charging cycles tailored to your specific chemistry.

3. Product Description

This utility regulator converts raw panel current into stable battery storage using advanced digital signal processing. The bright backlight LCD updates readings continuously so you track performance at a glance. Robust internal routing handles high-amperage draws while shielding vulnerable components from thermal runaway.

4. Product Overview

The unit serves residential rooftops, marine rigs, camping trailers, and remote commercial stations. Heavy-duty copper traces and isolated heatsinks guarantee stable operation from minus thirty-five degrees Celsius to plus forty-five degrees Celsius. Clean aluminum housing mounts easily to walls or racks near your energy hub.

5. Key Benefits

Your storage bank charges faster despite variable cloud cover or partial shading. Real-time diagnostics identify loose connections or voltage drops before they trip your main breaker. You can daisy-chain up to twelve units to double your charging capacity on expansive roof arrays. Consistent three-stage delivery extends expensive lithium and gel cell lifespans significantly.

6. Features

• Intelligent Protection Layers Blocks negative PV input, caps DC output current, and halts operation during dangerous ambient heat.
• One-Click Data Restore Recovers factory presets instantly if settings become unstable during harsh grid surges.
• Low Standby Draw Consumes less than one Point Two watts when idle, preserving stored power overnight.

7. Specifications

• Rated Charging Current Sustains sixty amps continuous feed across compatible voltage buses.
• Max PV Input Voltage Accepts up to one hundred sixty volts open circuit safely.
• System Compatibility Supports sealed lead acid, vented wet, gel, NiCd, and lithium configurations.
• Physical Dimensions Frames twenty-three zero by one hundred sixty-five by seventy-two millimeters weighs one point three three kilograms.

8. What’s Included

The shipment arrives containing the primary MPPT regulating controller preloaded with baseline parameters for immediate integration.

9. What’s Included

Mounting hardware and terminal block covers sit alongside the main housing to speed up wall or rack installation.

10. How to Use

Secure the bracket to a flat vertical surface using standard screws. Wire your battery bank to the dedicated DC terminals first and verify polarity alignment. Attach your solar array cables next until the display confirms active detection. The interface locks settings automatically once stable input voltage stabilizes.

11. Customer Benefits

You reclaim valuable floor space thanks to the compact frame and flexible mounting orientation. Automated balancing routines prevent overcharging and extend delicate battery plate integrity. Rapid fault alerts remove guesswork during seasonal maintenance windows. Higher tracking efficiency means smaller panel footprints deliver equivalent wattage compared to older PWM alternatives.

12. Ideal Uses

Power greenhouse climate controls, thermal water heaters, outdoor security lighting arrays, and off-grid communication hubs. Manage hybrid generator systems requiring smooth transition logic during fuel pauses. Scale homestead microgrids where predictable battery refill rates determine daily appliance usage limits.

13. Who It’s For

DIY homeowners seeking plug-and-play solar upgrades without complex programming boards. Independent electricians servicing commercial rooftop installs that demand scalable current sharing. Facility engineers managing standalone water treatment pumps or remote research equipment stations.

14. 5 Frequently Asked Questions

Does this unit accept lithium iron phosphate chemistry safely? Yes. The DSP algorithm recognizes LiFePO4 profiles and applies accurate absorption floats to maximize cycle life without risking cell swelling.

Can I expand my system later by adding more regulators? Absolutely. The parallel architecture supports up to twelve modules communicating flawlessly to share load demands evenly.

What protects my panels if I wire them backwards? Integrated reverse polarity shields detect negative line exposure and cut the circuit instantly before reaching sensitive semiconductors.

Do I need to manually set my battery voltage type? No. Fast scanning software identifies the connected bus level and configures optimal charge curves automatically.

Will this handle sudden cloud shadows or partial panel blockage? Continuous MPPT scanning reroutes available current instantly to maintain steady inflow rates despite intermittent shade shifts.

• PowMr MPPT Solar Charge Controller
• Ourlum.com
• Ourlum.com Collections
• Ourlum.com Best Sellers

Model
PV Input
Max Open Voltage of PV Module	160Vdc
Max. Input Power
For 12V system	720W 20-80Vdc;
For 24V system	1440W 37-105Vdc;
For 36V system	2100W 50-160Vdc;
For 48V system	2800W 72-160Vdc.
Charge Mode
Charging Technology	MPPT
Charge Algorithm	3-Stage
Nominal System Voltage	12V/24V/36V/48V
Battery Voltage Range	9~70V
Rated Charging Current	60A
Conversion Efficiency	≤98%
MPP Tracking Efficiency	>99%
Self-consumption	0.7W-1.2W
DC output
Rated Output Current	6A
Max. DC Output Current	8A
Max. Capacitive Load Capacity	10000µF
Environment
Operating Temperature Range	-35℃~+45℃
Humidity Range	≤95%，Non-condensing
Altitude	<3000m
General Specification
Protection Class	IP32
Dimension	230*165*72mm (9.1*6.5*2.8in)
Net Weight	1.33kg (2.9lbs)