Sovol Dual Spool Filament Dryer

• Sovol SH02 Dual Spool Dryer
• 150W PTC Fast Heater
• Nine-Filament Presets
• Enhanced Moisture Seal
• Auto-Cutoff Safety

• Biblical Mysteries video channelSovol Dual Spool Filament Dryer
• Smart Electronics and Connected Devices
• Smart Electronics and Everyday Accessories
• Featured Gadgets and Useful Devices

• Sovol SH02 Filament Dryer
• Dual Spool Filament Dryer
• PTC Fast Heater 150W
• 9-One Touch Filament Presets
• Improved Moisture Seal

Sovol Dual Spool Filament Dryer

Stop wasted prints and cracked layers caused by damp filament. The Sovol SH02 removes moisture from two spools at once, using a focused 150W PTC heater that reaches 50°C in seven minutes to dry your material faster than standard boxes. You get reliable results every layer.

Key Features

• Dual Spool Design Accommodates two 1kg rolls simultaneously to support multi-color prints or backup spools, saving floor space while keeping your workflow tidy.
• One-Button Presets Select dried parameters for nine popular plastics including PLA, TPU, PETG, ABS, ASA, PVA, PC, PA, and PP , so you never dial the wrong temperature again.
• 360° Air Circulation A built-in fan pushes hot air evenly across the spools to eliminate cold spots and ensure consistent moisture removal throughout the drying cycle.
• Enhanced Gasket Seal Thicker sealing materials wrap the box tightly to prevent humidity intrusion, keeping your filament dry inside the cabinet whether powered on or sitting open.
• Automatic Cut-Off Protection Heating stops safely at 130°C, resumes at 90°C, and triggers a fan-failure alarm to warn you before components overheat, giving you peace of mind during long cycles.

Product Description

Designed for makers who care about surface finish and dimensional accuracy, this dryer box integrates smart safety checks with high-efficiency heating. The newly positioned filament feed holes accept standard PTFE tubes and align naturally with most 3D printer extruders, regardless of where the nozzle sits on the toolhead. You simply slide the tube through the top opening and let the machine handle the rest.

Product Overview

This rectangular desktop unit serves as both a drying station and a storage shield. It bridges the gap between active drying and passive protection, storing your material under controlled conditions when unplugged. The package includes the SH02 unit ready for immediate use without requiring assembly tools or complex wiring.

Key Benefits

You spend less time troubleshooting print failures and more time finishing projects. Rapid heating reduces prep time before a job, while the adjustable range from 40°C to 70°C lets you match the thermal tolerance of exotic resins like carbon-filled nylon. The ability to dry two rolls together helps you maintain stock levels for production runs without leaving one spool vulnerable to ambient humidity.

Specifications

• Model Number SH02 by Sovol.
• Heater Power 150W PTC module.
• Temperature Range Adjustable 40°C to 70°C.
• Heating Speed 50°C in 7 minutes; 70°C in 25 minutes.
• Filament Capacity Two spools, up to 1kg each.
• Feed Hole Compatibility Accepts standard PTFE tubing.
• Assembly Plug-and-play; no tools required.

What's Included

The Sovol SH02 filament dryer box. Please note desiccant bags are sold separately and not contained in the package. If your order specifies additional accessories, refer to your receipt; otherwise, the shipment contains the main housing and power interface.

How to Use

Insert your PTFE pipe through the designated hole and route it to your printer's feeder. Press the button corresponding to your filament type to activate the factory preset settings for temperature and duration. If you prefer manual control, adjust the slider to your desired heat level between 40°C and 70°C and monitor the cycle. Place four desiccant packs inside to boost moisture absorption efficiency.

Customer Benefits

You achieve stronger layer adhesion and glossy finishes by eliminating internal water vapor. The reduced risk of stringing and bubbling saves you expensive material costs on failed prints. Smart alarms alert you to fan issues immediately, preventing damage that could ruin hours of drying work.

Ideal Uses

Run this box overnight to prep Nylon, Carbon-Fiber blends, or TPU spools before they touch the bed. Keep PLA and PETG stored inside between jobs to guard against rainy weather or humid basements. Use both slots to dry a primary color alongside a support material, ensuring everything is ready when you click start on slicer software.

Who It's For

This fits hobbyists upgrading to flexible filaments, professionals managing dual-extrusion setups, and shops facing high-humidity environments. Anyone tired of replacing clogged nozzles or dealing under-extrusion due to wet plastic will find this unit essential.

Frequently Asked Questions

Does the dryer include desiccant packs?
No, desiccant bags are not included in the package. You can add four packs yourself to improve drying quality and speed.

Can I store filament after drying without sealing it?
Yes, the upgraded thick seal keeps humidity out effectively. You can leave the door closed to protect your filament even when the power is off.

How do I know if the dryer is working correctly?
The unit displays active heating states. If the internal fan ever stops spinning, a built-in alarm sounds to notify you that the fan requires replacement.

Does the SH02 require assembly?
Assembly is not required. The unit arrives ready to use straight out of the box with no tools needed.

Is the box loud during operation?
The specifications do not disclose decibel levels or sound measurements. The built-in fan provides 360° circulation, and you may hear normal airflow noise.