24V 3300W Hybrid Solar Inverter 110V

The DATOU BOSS DT-2433U hybrid inverter merges solar charging, grid power, and battery backup into one 3300W wall-mounted unit. You get immediate 10-millisecond switching, 92% peak efficiency, and a pure sine wave output. Smart air cooling and full protection keep your appliances running safely during outages or off-grid operation.

• Hybrid Solar Inverter
• MPPT Charger
• Pure Sine Wave Inverter
• Solar Battery Crossover
• Off Grid Power System

DATOU BOSS 24V 3300W Hybrid Solar Inverter DT-2433U for Home Backup Power

Key Features

• 3-in-1 Design: Combines an MPPT tracker, hybrid inverter, and charger in one wall-mounted chassis.
• Smart Monitoring: Tracks PV input from 40 to 450 volts with up to 99.9 percent tracking efficiency.
• Fully Protected: Guards against overloads, short circuits, high heat, and reverse wiring with IP20 durability.

Product Description

You connect this inverter to your 24-volt battery bank and attach solar panels to start generating stable AC power. The LCD and LED screen shows real-time status, while smart air cooling keeps the internal components running cool. You can track system health through RS232 or RS485 ports whenever you need to check performance.

Product Overview

This wall-mounted unit handles solar energy conversion and battery management without requiring separate stations. It bridges sunlight, battery storage, and your household outlets in a single compact frame.

Key Benefits

You enjoy uninterrupted electricity when the grid fails because the transfer time takes just ten milliseconds. Your sensitive electronics stay safe behind the pure sine wave output, and the built-in lithium activation ensures faster battery recovery from deep discharge.

Features

The system accepts up to 5000 watts of panel input and charges batteries at a steady 120 amps. It delivers 3300 watts of continuous AC power at 105 to 120 volts across standard 50 or 60 hertz frequencies. Peak efficiency reaches 92 percent during daily operation.

Specifications

• Model: DT-2433U
• Input Voltage: 24V DC system support
• Output: 3300W pure sine wave, 105–120VAC
• Weight: 6.5 kg net
• Protection: IP20 rated enclosure

What’s Included

The package ships with the complete DT-2433U inverter unit. All necessary mounting hardware and terminal connections prepare the device for immediate wall installation.

How to Use

Secure the bracket to a sturdy wall, mount the main frame, then run battery cables before connecting your solar array. Set your communication protocol via the RS ports, toggle the display settings, and switch the unit to automatic mode for seamless power management.

Customer Benefits

You replace multiple bulky devices with a streamlined setup that saves floor space. Clear LED feedback cuts guesswork, and the robust design handles demanding residential loads without tripping.

Ideal Uses

Run refrigerators, water pumps, and lighting setups across remote cabins, emergency shelters, or backyard workshops where reliable grid access is uneven.

Who It’s For

This system suits homeowners who install modest solar arrays and need dependable crossover power for lead-acid or lithium banks. DIY installers and small commercial sites benefit equally from the straightforward wiring design.

Frequently Asked Questions

Can this inverter handle lithium batteries directly?
Yes, the built-in lithium activation feature powers down cells straight from the grid or solar source. Full BMS communication keeps voltage balancing accurate.

How long does the backup switch take during blackouts?
The unit transfers load in exactly ten milliseconds. Your computers and LEDs reset before most breakers trip or lights flicker noticeably.

• 24V 3300W Hybrid Solar Inverter 110V
• Ourlum.com
• Ourlum.com Collections
• Ourlum.com Best Sellers