SPECIFICATIONS

AC Current: 10A

AC Current Measurement: Up to 10 A

AC Voltage: 1000V

AC Voltage Measurement: Up to 750 V

Battery Included: no

Battery Test Ranges: 1.5 V, 9 V and 12 V

Brand Name: NJTY

Capacitance Measurement: Up to 20 mF

Certification: CE,RoHS

Choice: yes

DC Current: 10A

DC Current Measurement: Up to 10 A

DC Voltage: 1000V

DC Voltage Measurement: Up to 1000 V

DIY Supplies: Electrical

Data Record: No

Display: 2000-Count LCD

Display Type: Digital Display

Frequency Measurement: Up to 20 MHz

High-concerned chemical: none

Low Impedance Mode: Yes, LoZ AC/DC Voltage Measurement

Measuring Resistance Range: 200Ω-200MΩ

Model Number: T9205N

Operating Mode: Manual Range

Operating Temperature: 0-40℃

Origin: Mainland China

Phase Sequence Detection: Yes, for suitable three-phase AC systems

Power Supply: 2 x 1.5 V AAA Batteries(Not Included)

Resistance Measurement: Up to 200 MΩ

Semi-finishedproduct: No

True RMS: Yes

T9205N 2000-Count True RMS Digital Multimeter with Three-Phase Sequence Detection, NCV, Live Wire Identification, LoZ Voltage Mode, Battery Test and AC/DC Measurements

PRODUCT SPECIFICATIONS

Model: T9205N

Display: 2000-count LCD with backlight

DC Voltage Range: 200mV to 1000V

AC Voltage Range: 2V to 750V

DC Current Range: 200µA to 10A

AC Current Range: 200µA to 10A

Resistance Range: 200Ω to 200MΩ

Capacitance Range: 6nF to 20mF

Frequency Range: 600Hz to 20MHz

Battery Test Ranges: 1.5V and 9V/12V

Additional Functions: Phase Sequence, NCV, Live Wire, LoZ, Continuity, Diode, Duty Cycle and Transistor hFE

Convenience Features: Data hold, backlight, low battery indicator and automatic power off

Power Supply: 2 × 1.5V AAA batteries(Not Included)

Three-Phase Sequence Detection

Check the phase order of a suitable three-phase AC supply. After testing phases A, B and C in sequence, the display shows a direction indication to help check phase connections for three-phase equipment.

NCV and Live Wire Detection

Bring the sensing area near a suspected AC source in NCV mode. The indicator light and buzzer respond when an electric field is detected. Live mode provides a separate test-lead function for identifying a live wire.

Low-Impedance Voltage Measurement

Switch to LoZ mode for low-impedance AC or DC voltage measurement. This gives you an additional voltage test mode alongside the meter’s standard AC and DC voltage functions.

Dedicated Battery Test

Select the 1.5 V or 9 V/12 V setting to check a compatible battery. The LCD displays its voltage under load, providing a direct reading without a separate battery tester.

AC/DC Measurements and Component Tests

Measure voltage, current, resistance, capacitance and frequency with one meter. Duty cycle, diode and transistor hFE functions add more options for testing suitable circuits and components.

Audible Continuity Check

Use the continuity function to check disconnected wires, switches and fuses. The buzzer sounds when the measured resistance is below 50 Ω.

Backlit Screen and Convenient Reading

The LCD backlight helps you read results in dim areas, while Data Hold keeps a measurement on screen. The screen has the acrylic protection and magnetic back you confirmed for this product.

APPLICATION SCENARIOS

Car Care: Check battery voltage and inspect accessible electrical circuits with the appropriate measurement mode.

Home Wiring: Check AC voltage at outlets and switches, or use NCV and Live modes to help locate live wiring.

Electronics Bench: Test resistors, diodes, capacitors and other suitable components during circuit board repair.

Workshop Maintenance: Check equipment circuits and use PHASE mode to inspect phase order in suitable three-phase AC systems.

PACKAGE CONTENTS

-T9205N Digital Multimeter × 1
-Test Leads × 1 Pair
User Manual × 1

Note

-Phase sequence detection is for suitable three-phase AC systems.

-NCV responds to AC electric fields and does not display an exact voltage value.

-Select the correct function and input terminals before connecting the test leads.

-Disconnect power before testing resistance, continuity or diodes. Fully discharge capacitors before measuring capacitance.

-Batteries are not included. Please purchase 2 × 1.5 V AAA batteries separately.