GEOID CS600 Speed Cadence Sensor ANT Plus Bluetooth Dual Protocol For Garmin

Introducing the GEOID CS600 Dual-Protocol Speed & Cadence Sensor—designed specifically for Garmin enthusiasts who demand precise pedaling and motion data without the hassle of multiple gadgets. This compact sensor pair delivers speed and cadence readings simultaneously via ANT+ and Bluetooth, giving you richer training insights whether you ride solo or push your Garmin edge to the limit.

Two sensors, one goal: complete cycling data

The CS600 features two independent sensors, each capable of running in two modes—speed and cadence. You can capture both metrics at the same time for a holistic view of your pedaling efficiency, cadence consistency, and speed dynamics. Switching modes is simple: install or reinstall the battery to toggle between Cadence Mode and Speed Mode. When you power up, you’ll see a distinct LED indicator signaling the current mode—RED for cadence, GREEN for speed—so you’re never guessing what data you’re collecting.

How to switch modes in seconds

• Cadence Mode—Reinstall the battery until the RED LED flashes. Then rotate the crank and search for the sensor via your ANT+ or Bluetooth cycling app.
• Speed Mode—Reinstall the battery until the GREEN LED flashes. Then spin the wheel and connect the sensor in your cycling app.

Tip: Always remove the battery insulation sheet before installation to ensure reliable contact and quick wake-up.

Seamless pairing with Garmin and your favorite apps

Designed for compatibility with Garmin devices, the CS600 also works with any ANT+ or Bluetooth-enabled cycling apps. To connect:

• Turn on Bluetooth on your phone.
• Open your cycling app and add a new sensor (avoid searching from your phone’s Bluetooth settings); the app will discover the CS600 via ANT+ or BLE.
• Remove the battery insulation sheet, confirm the connection, and start riding. The app should display speed and cadence data normally.

If you encounter any issue during pairing, we’re ready to help—just reach out and we’ll support you to get accurate readings right away.

Why the GEOID CS600 stands out

• Dual Protocol, Dual-mode: Each sensor supports ANT+ and Bluetooth simultaneously, with independent speed and cadence data. Perfect for Garmin ecosystems or apps that benefit from BLE and ANT+ data streams.
• Independent mode switching: Swap between Cadence and Speed by re-installing the battery—no recalibration or recalibration steps required.
• Simultaneous data capture: Two sensors provide consistent speed and cadence measurements in parallel, giving you a complete picture of your cycling performance.
• Clear visual indicators: Red LED for cadence, Green LED for speed—you’ll know exactly which metric you’re logging at a glance.
• Practical, rider-focused design: Lightweight, compact sensors that attach without clutter, designed to work with Garmin devices and compatible apps for training analytics.

Installation, care, and practical tips

• Install with the provided battery and make sure to remove the insulation sheet before use.
• Ensure correct battery orientation and secure the sensor where it won’t be rattled by rough roads or vibration.
• When switching modes, a quick battery reinsertion is all you need—no tools required.
• Store and transport the sensors away from moisture and extreme temperatures to preserve battery life and signal integrity.

The GEOID CS600 is a practical upgrade for cyclists who rely on Garmin or BLE-enabled apps to track real-time speed and cadence. Its dual-sensor approach, straightforward mode switching, and robust compatibility make it a reliable choice for daily training, tempo rides, or serious performance testing.